Current research projects

Image Tribological investigations of oil-refrigerant-material-systems
Image Service offer for Leak Detection and Tightness Test
Image In-Situ-Swelling Behaviour of Polymer Materials in Flammable Fluids
Image Measurements on ceiling mounted cooling systems
Image Pulse-Tube-Refrigerator with sealed compressor
Image Cold meter
Image Verification of storage suitability of cryo tubes
Image Modular storage system for solar cooling
Image Heat2Power
Image High temperature heat pump
Image Hybrid- Fluid for CO2-Sublimation Cycle
Image Software for test rigs
Image Low Temperature Measuring Service
Image Non- invasive flow measurements
Image Brine (water)-water heat pump
Image Reducing the filling quantity

You are here:   /  Home


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request