Current research projects

Image Mass Spectrometer
Image Micro heat exchangers in refrigeration
Image Brine (water)-water heat pump
Image Solar Cooling
Image Thermostatic Expansion Valves
Image Verification of storage suitability of cryo tubes
Image Tribological investigations of oil-refrigerant-material-systems
Image Panel with indirect evaporative cooling via membrane
Image Electrochemical decontamination of electrically conducting surfaces „EDeKo II“
Image Air-water heat pumps
Image Measurements on ceiling mounted cooling systems
Image Service offer for Leak Detection and Tightness Test
Image Filter Tests
Image Lifetime prediction of hermetic compressor systems
Image Influenced melting point of water by magnetic field
Image Helium extraction from natural gas

You are here:   /  Home


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects

Image

Brine (water)-water heat pump

Test according DIN EN 14511 and 14825

Image

High temperature heat pump

Using waste heat from industrial processes

Image

Air-water heat pumps

Test according DIN EN 14511 and 14825

Image

Micro heat exchangers in refrigeration

3D-printing of micro heat exchangers

Image

Electrochemical decontamination of electrically conducting surfaces „EDeKo II“

Improvement of sanitary prevention by electrochemical decontamination