Current research projects

Image All-in-one device for freeze-drying and production of biomaterial
Image Tensile and compression testing
Image Pulse-Tube-Refrigerator with sealed compressor
Image Industry 4.0 membrane heat and mass exchanger (i-MWÜ4.0)
Image Testzentrum PLWP at ILK Dresden
Image Laseroptical measurement
Image Lifetime prediction of hermetic compressor systems
Image Mass Spectrometer
Image Investigation according to DIN EN ISO 14903
Image Hybrid- Fluid for CO2-Sublimation Cycle
Image Characterisation of Superconductors in Hydrogen Atmosphere
Image Electrical components in refrigeration circuits
Image Low Temperature Measuring Service
Image In-situ investigation concerning the swelling behaviour of polymer materials under elevated pressures and temperatures
Image Calibration of Low Temperature Sensors
Image Micro fluidic expansion valve

You are here:   /  Home


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects

Image

Heat2Power

Refining of fuel cell waste heat

Image

Reducing the filling quantity

How much refrigerant must be filled?

Image

Performance tests of condensing units

Does your condensing unit perform well?

Image

State of system and failure analyses

Cause of the failure unknown?