Current research projects

Image Humidifier System for High-Purity Gases
Image Test procedures for electrical components
Image Overall System Optimization of Refrigeration Plant Systems for Energy Transition and Climate Protection
Image Tensile and compression testing
Image Cool Up
Image Software for technical building equipment
Image In-Situ-Swelling Behaviour of Polymer Materials in Flammable Fluids
Image Reduction of primary noise sources of fans
Image Development of a Cryogenic Magnetic Air Separation Unit
Image Mass Spectrometer
Image Low Temperature Measuring Service
Image Testzentrum PLWP at ILK Dresden
Image Behavior of multiphase cryogenic fluids
Image Investigation of coolants
Image Air-flow test rig for fan characteristic measurement
Image Certifiable connection types in cryogenics

You are here:  Home /  Research and Development


Innovative small helium liquefier

EuroNorm GmbH (BMWi)

Dr. Erik Neuber

+49-351-4081-5122

Liquefaction rates from 10 to 15 l/h

The goal of the R & D project is to explore new innovative ways to develop the functional model of a "helium liquefier for the small liquefaction rate". The development of such a system should cover the still non-existent area of the market.

 

This liquefier should contain several innovations and technical solutions:

  • Development of a helium liquefaction system with a liquefaction rate of 10 - 15 liters per hour of liquid helium.
  • Development of an innovative pre-cooling stage, which works with a mixture of helium and refrigerants as working fluid.
  • Detailed investigation of an innovative helium cycle within the development of the helium small liquefier with the ability to operate in different operating regimes: helium liquefaction, cooling and temperature stabilization/control.
  • Operation of the condenser with a liquefaction rate that can be varied over a wide range - between 75% and 100%.

Currently, the functional design of the helium small liquefier is being set up. The figure shows a 3D model of the cold box, in which all heat exchangers and cold valves are mounted. In the upper part of the cold box, two prototypes of low flow helium turboexpanders are mounted. All external components, piping and condenser control system are located on the front of the cold box.


Your Request

Further Projects - Research and Development