Current research projects

Image Intelligent innovative power supply for superconducting coils
Image Laseroptical measurement
Image 3D - Air flow sensor
Image High Capacity Pulse Tube Cooler
Image Software for technical building equipment
Image Helium extraction from natural gas
Image Hybrid- Fluid for CO2-Sublimation Cycle
Image Air-water heat pumps
Image Behavior of multiphase cryogenic fluids
Image Verification of storage suitability of cryo tubes
Image Range of services laboratory analyses
Image Tensile and compression testing
Image Measurements on ceiling mounted cooling systems
Image Cold meter
Image Filter Tests
Image Software for test rigs

You are here:  Home /  Testing Equipment


Humidifier System for High-Purity Gases

Industry and Research Instituts

Moritz Kuhn

+49-351-4081-5120

Nafion - moisture transfer

At the ILK Dresden a humidification system was developed and manufactured which is especially suitable for research facilities where very low dew point temperatures have to be adjusted and at the same time a high gas purity has to be guaranteed. The core component is a PermaPure® humidifier with Nafion® moisture exchange. The humidification system precisely controls the dew point via a bypass mixing with dry gas and also takes over the automatic filling of evacuated containers. The control system is optimised to prevent recondensation. Humidification can be controlled from any plant system via an interface. Table 1 shows the technical data of a humidification system for the humidification of synthetic air realized for the KIT in Karlsruhe. The system can be adapted for other applications, and all parameters can be adjusted to the respective requirements.

Table  1: Technical Data Humidifier System
Parameter Value
setpoint gas flow 750 litre/min
maximum relative humidity 95%
minimum dew point -60°C / -76°F
degree of gas purity 5.0
gas purity, number of particle < 5 particle/cm³

Your Request

Further Projects - Testing Equipment